Hotels, malls and office buildings have a power problem that factories mostly do not. They pay some of the highest electricity rates in India, and their busiest hours fall right in the evening peak, when tariffs are most expensive.
That combination is why battery storage is starting to make sense for commercial buildings. Here is how the numbers work, using real tariff orders.
Commercial tariffs are expensive, and getting more so
Electricity regulators charge commercial buildings more than industry. In Maharashtra, the state electricity regulator MERC reports that high-tension (HT) commercial consumers paid an average of ₹16.97 per unit in FY 2024-25. HT industry paid ₹10.88.
The bill has two parts that a battery can attack:
- Energy charges, billed per unit, which now vary by time of day.
- Demand charges, billed on your highest recorded demand in the month, in rupees per kVA. Our explainer on demand charges covers how these are measured.
Demand charges are rising fast. MERC’s March 2026 order sets out a multi-year path for HT commercial consumers:
That is a rise of about 37% over five years. Karnataka is lower but moving the same way: its HT-2(b) category, which covers hotels, offices and commercial complexes, carries demand charges of ₹370, ₹375 and ₹380 per kVA per month for FY26 to FY28, according to the KERC tariff schedule.
Time-of-day pricing makes the evening expensive
Since 2023, national rules have required time-of-day (ToD) tariffs. Under the Electricity (Rights of Consumers) Amendment Rules, commercial and industrial consumers with demand above 10 kW had to be on ToD by 1 April 2024. Their peak energy charge must be at least 1.2 times the normal rate, and the solar-hours rate at least 20% lower. Our time-of-day tariff guide explains the mechanics.
States apply this in their own way:
| State | Cheaper window | Expensive window |
|---|---|---|
| Maharashtra (from April 2026) | 09:00-17:00 solar hours: 15% rebate (Apr-Sep), 25% rebate (Oct-Mar) | 17:00-24:00: 20% surcharge |
| Karnataka (HT, 500 kVA and above; Dec-Jun) | 22:00-06:00: 100 paise/unit less | 06:00-09:00 and 18:00-22:00: 100 paise/unit more |
For a hotel or mall, the expensive window is exactly when the building is busiest: guests check in, restaurants fill, shoppers arrive and every light is on. A battery charged during cheaper hours and discharged into that window earns the gap every day. It also trims the monthly peak that sets the demand charge. That is the peak shaving function, and our guide to demand charge management shows how it is sized.
A real example: Taj Exotica, Goa
IHCL (Indian Hotels Company) and Tata Power have installed a battery of about 2 MW at Taj Exotica Resort & Spa in Goa, reported as India’s first hotel battery storage system.
According to the published report, the project cost about ₹3.5 crore and is projected to save about ₹1.5 crore a year. It runs alongside the grid, diesel generators and solar, with automatic generator synchronisation. It is reported to cut diesel use by about 2 lakh litres a year.
Those are projections, not audited results, and a resort with large diesel use is a favourable case. But they show where the value comes from: tariff savings plus less generator running. For a fuller comparison, see BESS vs diesel generator costs.
Hotels, malls and offices are not the same
Hotels run around the clock, with an evening and night peak from rooms, kitchens and laundry. Backup matters for guest experience, and many hotels run generators often. One Maharashtra detail matters here: MERC’s 2026 order moves hotels with lodging back into the commercial category. They receive a refund of the tariff difference under the state’s Tourism Policy 2024 instead.
Malls have a sharp late-afternoon and evening peak from air conditioning, lighting and food courts. That load sits almost entirely inside the peak-tariff window, which suits a 2-to-4-hour battery well.
Office buildings peak in the working day. That falls more into solar hours than the evening peak, so the case rests on demand charges and on pairing with rooftop solar rather than pure ToD shifting. See our guide to commercial rooftop solar and storage.
What the building code does and does not say
The Energy Conservation and Sustainable Building Code (ECSBC) applies to new commercial buildings with a connected load of 100 kW or more, or a contract demand of 120 kVA or more. The 2024 version does not require battery storage. For now, storage is a cost decision, not a compliance one.
What this means for you
- If you run a hotel: look at diesel use and evening peak together. A battery that bridges short outages and covers the peak-tariff hours can cut both bills at once.
- If you run a mall: your load profile matches the peak window closely. Check your demand charge line first, because it is rising every year in states like Maharashtra.
- If you own an office building: pair the battery with rooftop solar and size it mainly for demand charges.
- If cash is the constraint: battery-as-a-service and opex models exist, though terms vary.
- Hardware: most commercial buildings are served by a C&I cabinet system, with containers for larger malls and campuses.
- Next step: put twelve months of bills into our BESS savings calculator to see what a battery would earn on your tariff.
Tariffs, time-of-day windows and consumer categories are revised through state regulator orders, usually every year. Treat this as a November 2026 snapshot and verify the current tariff order for your state and category before making an investment decision.